Installing Magnetic Track Lighting — Step-by-Step Guide 2026 | ramo.co.il

Want flexible lighting you can reposition in seconds? 💡 The Nisko TIKTOK magnetic rail is Israel's leading solution — magnetic LED spots that snap on and off without tools. This guide explains how to plan, wire and install a magnetic track lighting system at home or in a business.

⚡

Quick Summary

✅ TIKTOK magnetic rail comes in 1m and 3m — direct 220V connection
💡 DOT and FLAT spots attach and detach with a press — no tools needed
⚠️ Electrical connection to mains must be performed by a licensed electrician
🔧 Recessed (trimless) rail suits plasterboard ceilings — must be planned before finishing
📦 TIKTOK rail from ₪38 — fully stocked at ramo.co.il

What You Need Before Installation 🧰

For a Nisko TIKTOK magnetic track installation: Rail — choose between 1m single-phase rail (₪38) for small rooms or 3M 48V recessed trimless rail (₪237) for plasterboard ceilings. Spots: DOT22 12W 3CCT (₪67) for general lighting, DOT43 24W (₪94) for high-light areas, FLAT30 10W (₪47) for a flat decorative effect. Electrical: Built-in 48V driver — a licensed electrician connects to 220V mains. Connector (₪17) to join two rails in series. Spot count: Average 1 spot per 2m².

⚠️

⚠️ Mains Connection — Licensed Electrician Only!

The TIKTOK rail runs on 48V DC (safe to touch) — but is powered from 220V AC mains, which must be connected by a licensed electrician. DIY mains connection is dangerous and voids the warranty.

Step by Step — Installing Magnetic Track Lighting 👷

Step 1 — Plan: Measure the ceiling length. For a 15m² room, plan 2–3m of rail with 4–6 spots.
Step 2 — Surface or recessed? Surface mount is quick and installs on any existing ceiling. Recessed (trimless) requires new plasterboard — must be planned before finishing.
Step 3 — Prepare mains feed: Electrician runs 3-core cable (L+N+PE) from the panel to the rail feed point.
Step 4 — Mount the rail: Mark the centreline, drill 6-8mm holes, insert rawlplugs, screw the rail every 50cm.
Step 5 — Electrician connects power: Built-in driver wired by electrician (L=red, N=blue, PE=green/yellow).
Step 6 — Attach spots: Place the magnetic spot on the rail — it snaps and connects electrically automatically. Slide anywhere along the rail without tools.
Step 7 — Test: Switch on. Check all spots. Aim them as needed. For 3CCT spots, press the button to cycle between 3,000K / 4,000K / 6,500K.

💡

💡 Pro Tip

Israeli lighting designers recommend placing the rail at 1/3 of the room depth from the wall — not in the centre. This creates accent lighting on walls and furniture, not flat overhead glare.

Products Available at ramo.co.il 🛒

Product	Price (incl. VAT)	Stock	Buy
TIKTOK DOT22 Magnetic LED Spot 12W 3CCT Nisko	₪67 incl. VAT	✅ In Stock	🛒 Buy
1m Single Phase Surface Rail Black Nisko	₪38 incl. VAT	✅ In Stock	🛒 Buy
TIKTOK FLAT30 Magnetic LED Spot 10W 30cm 3CCT Nisko	₪47 incl. VAT	✅ In Stock	🛒 Buy
TIKTOK 3M 48V Recessed Trimless White Rail Nisko	₪237 incl. VAT	✅ In Stock	🛒 Buy