Bonding marble and stone needs an adhesive that handles weight, variable porosity, and sometimes moisture. The wrong product leads to lift, staining or expensive breakage.
Quick Summary
- Heavy slabs/cladding — dedicated high-capacity marble/stone adhesive
- Spot fixes and profiles — MS Polymer / High Tack
- Stable dry substrate is mandatory
- Check stone porosity (soft marble vs granite)
- Do not skimp on adhesive coverage
When you need dedicated stone adhesive
For heavy pieces or large areas use a high-capacity marble/stone adhesive. RamoBond’s 4L General High Capacity adhesive is built for serious professional jobs.
When MS Polymer is enough
For profiles, small thresholds or repairs, SUPER 77 / SEALFIX High Tack can be faster and more precise. For wet-area perimeter sealing after bonding, use RTV silicone where appropriate.
📋Recommended bonding process
Check stability
A moving substrate becomes a future failure.
Clean oils and dust
Dusty stone does not bond. Clean and fully dry.
Full coverage
Cover the back/base per adhesive instructions — not just dots on heavy slabs.
Align and support
Set with a level and support until initial grab.
Seal if needed
After cure, seal moisture-sensitive joints.
RamoBond products for stone work
General Chemical Engineering Dabek Shish and Stone Professional 4 Liter – High Capacity
Marble/stone adhesive 4L
₪122
View product
SUPER 77 – Professional MS Polymer Adhesive and Sealant High Strength 290 ml
MS Polymer repairs
₪22
View product
SEALFIX - High-tech professional polymer adhesive with high initial grip up to 350 kg, 290 ml
Fast profile fixing
₪20
View product
American Eagle Silicone 100% RTV – Professional Acetic Silicone for Sealing and Adhesion 280 ml
RTV for wet perimeters
₪10
View productFAQ
Can marble adhesive go on concrete?
Usually yes — ensure concrete is stable, clean and dry, and follow cure times.
Why do light marbles stain?
Moisture or chemistry can migrate into porous stone. Use suitable adhesive, wipe residue immediately.
How long before loading?
Wait for the full cure on the label — especially for heavy slabs and cold conditions.
Conclusion
Heavy stone → dedicated adhesive. Profiles/repairs → MS Polymer. Wet edges → silicone. That stack holds.