Every connection between electrical cables must be protected inside a junction box — it's not just a code requirement, it's real protection against short circuits and fires. Nisko and Photex offer a range of junction boxes and enclosures from ₪4 incl. VAT, from compact drywall boxes to IP55 boxes for outdoor areas. This guide walks through choosing and installing them correctly, step by step.
Quick Summary
✅ Nisko and Photex junction boxes from ₪4 incl. VAT
💡 Code-compliant installation protects against shorts and fires
⚡ Indoor (drywall) and outdoor (IP55 / IP65) models
🔧 Extra accessories: cable connectors, hanging brackets, metal plates
🛒 All products in stock, delivered within days
What is a junction box, and why is it required?
A junction box is an enclosure used to connect, split, or branch electrical cables in a protected and insulated way. Without one, exposed wire connections are a fire and short-circuit hazard, which is why it's a basic code requirement in any electrical job.
Nisko offers several core types: round T-7P boxes rated IP65 for outdoor use, rectangular T-1 / T-1P boxes sized 100x100x50mm rated IP55, and a compact 4-module Photex box designed specifically for installation inside a drywall (gypsum) wall.
Beyond the boxes themselves, there are essential accessories — the P20 cable connector, which lets you join and split two cables neatly and safely, plus hanging brackets and metal plates for mounting larger CI boxes on walls or ceilings.
💡 Pro tip
For outdoor installations or near a solar water heater, always choose a box rated IP55 or higher — like the black T-1D distributor box designed exactly for that purpose. For a standard indoor connection inside a drywall wall, the compact Photex box is enough and much easier to install.
Steps to properly install a junction box
Step 1 — Power off and locate: Before any work, switch off the power at the main panel and verify with a voltage tester that the cables are dead. Mark the exact installation spot, keeping future maintenance access in mind.
Step 2 — Mount the box: In a drywall wall, cut an opening of the right size and push in the Photex box until it locks in place. For larger CI boxes, use the hanging brackets and the metal plate to anchor the box securely to a wall or ceiling.
Step 3 — Connect the cables and close up: Use a P20 cable connector to join and split the cables neatly, making sure every connection is tight and insulated. Close the box cover, restore the power, and test that everything works. If you're not confident, call a licensed electrician for the final steps.
Junction Boxes & Enclosures Price List — 2026 🛒
| Image | Product | Price (incl. VAT) | Stock | Buy |
|---|---|---|---|---|
 | P20 2-Cable 3-Core Connector, Nisko | **₪18** incl. VAT | ✅ In stock | 🛒 Buy |
 | Round Junction Box IP65 T-7P, Nisko | **₪6** incl. VAT | ✅ In stock | 🛒 Buy |
 | 4-Module Photex Drywall Box with Screws | **₪4** incl. VAT | ✅ In stock | 🛒 Buy |
 | Junction Box with Nipples T-1P 100x100x50 IP55, Nisko | **₪8** incl. VAT | ✅ In stock | 🛒 Buy |
 | Smooth Junction Box T-1 100x100x50 IP55, Nisko | **₪7** incl. VAT | ✅ In stock | 🛒 Buy |
 | 4-Piece Metal Hanging Brackets, Nisko | **₪11** incl. VAT | ✅ In stock | 🛒 Buy |
 | Metal Plate for CI Boxes — Small · Medium · Large | **₪12** incl. VAT | ✅ In stock | 🛒 Buy |
 | Black Solar Water Heater Distributor Box T-1D, Nisko | **₪15** incl. VAT | ✅ In stock | 🛒 Buy |
Our Recommended Products ⭐
P20 2-Cable 3-Wire Junction Module Nisko
₪16
View product
IP65 Round Junction Box T-7P Nisko
₪6
View product
4-Module Photex (Fotex) Box for Gypsum Board with Screws
₪4
View product
T-1P Junction Box with Spouts 100x100x50 IP55 Nisko
₪8
View product
Smooth T-1 Junction Box 100x100x50 IP55 Nisko
₪7
View product
Metal Hanging Brackets, 4 pcs
₪11
View product
Metal Plate for CI Box — Small · Medium · Large
₪12
View product
T-1D Black Solar Water Heater Junction Box Nisko
₪16
View productFrequently Asked Questions ❓
What's the difference between IP55 and IP65?
The second digit in an IP rating indicates protection against water. IP55 protects against water spray from any direction and suits most outdoor installations, while IP65 also protects against water jets and suits harsher conditions like areas exposed to direct rain.
Can a junction box be installed inside a drywall wall?
Yes — that's exactly what the 4-module Photex box is for. It fits into a cutout in the drywall and locks in place with screws, providing a protected base for electrical connections inside the wall.
What is the T-1D solar water heater distributor box for?
This black junction box is designed specifically for electrical connections near a rooftop solar water heater, built to withstand harsh outdoor conditions like sun, heat, and moisture.
Do I need a licensed electrician for installation?
Mounting the box itself can be done independently, but connecting the cables to the live electrical network should be handled by a licensed electrician, per safety regulations.
Conclusion
With prices starting at ₪4 incl. VAT and full stock across all models, setting up safe, code-compliant electrical connections is easy and accessible. Browse the price list, complete your toolkit, and order today.