A pipe system is only as good as the connectors holding it together. At ramo.co.il you'll find pipe connectors from Golan Industries and SP — push-fit couplers, stop-sleeve couplings, eccentric reducers and two-way connectors, priced from ₪6 up to ₪82 (incl. VAT). This guide explains how to choose the right connector, how to install it correctly, and gives you the full price list.
Quick Summary
✅ Prices start from just ₪6 for an eccentric reducer
🔧 MG push-fit couplers for 16–32mm pipes
🔩 Stop-sleeve couplings for a secure, leak-proof joint
↔️ SP two-way connector for complex pipe runs
📦 All models in stock with fast shipping
How to choose the right pipe connector? 🤔
Start by matching the connector diameter exactly to your pipe diameter — Golan Industries MG push-fit couplers cover the 16–32mm range and work for both straight joints and diameter transitions. If you need to join two different diameters, look for an eccentric reducer, which gives a smooth transition without disrupting flow.
A common mistake is using a standard coupling instead of a stop-sleeve coupling at points exposed to movement or vibration — the internal stop prevents the pipe from sliding in or out and keeps the joint sealed over time. Another mistake is over-tightening the connection, which can damage the seal.
In Israel, choose connectors that match your pipe's standard (PE, PVC or PPR depending on pipe type), and make sure the seals are rated for your water temperature — hot or cold — depending on use.
💡 Pro tip
Before connecting a push-fit coupler, make sure the pipe end is cut at a straight angle and sanded smooth — an uneven edge is the most common cause of leaks in push-fit joints.
Installation & use 🔧
Before installing, make sure you have all the connectors required by your pipe layout — including reducers for diameter changes and couplings for every joint. Clean pipe ends of dust and debris before connecting.
When installing, push the pipe fully into the connector until you feel slight resistance from the internal seal. Push-fit connectors need no special tools, but check that the joint sits straight, not at an angle.
After installation, run water at low pressure and check every joint for leaks before covering it with a wall or soil. For stop-sleeve couplings, do a visual check to confirm the stop has fully seated.
Connector price list 🛒
| Image | Product | Price (incl. VAT) | Stock | Buy |
|---|---|---|---|---|
 | מופה / מקשר MG ללחיצה (מידות 16–32 מ״מ, ישר ומעבר) Golan Industries | **₪21** incl. VAT | ✅ In stock | 🛒 Buy |
 | מצמד שרוול עם מעצור Golan Industries | **₪7** incl. VAT | ✅ In stock | 🛒 Buy |
 | מפחת אקצנטרי Golan Industries | **₪6** incl. VAT | ✅ In stock | 🛒 Buy |
 | מחבר דו-כיווני SP | **₪82** incl. VAT | ✅ In stock | 🛒 Buy |
Our recommended products ⭐
Frequently asked questions ❓
What is an MG push-fit coupler?
An MG coupler is a push-fit connector for polyethylene (PE) pipes, joining pipes from 16–32mm without welding or threading — you simply push the pipe into the connector.
When do I need an eccentric reducer instead of a standard coupling?
An eccentric reducer is used when transitioning between two different pipe diameters. It provides a smooth connection without disrupting flow or creating unwanted height differences.
What's the advantage of a stop-sleeve coupling?
The internal stop prevents the pipe from sliding in or out after installation, ensuring a stable, leak-proof joint for years — especially important at points exposed to movement or vibration.
How much do basic pipe connectors cost?
Our connector prices range from ₪6 to ₪82 incl. VAT — basic reducers and couplings start at ₪6–₪7, while advanced two-way connectors go up to ₪82.
Conclusion
All connectors in this price list are in stock and ready for fast shipping — find the right connector for your project and complete your pipe system with confidence.