ProTls Tile Spacers & Clips Price List — 2026 | ramo.co.il

Start by choosing the right grout width — spacers and clips come in sizes from 1mm to 3mm. Thin grout lines suit large, modern tiles, while wider lines give more room to compensate for tile imperfections. Also check the spacer shape — cross-shaped for floors, T-shaped for wall corners.

A common mistake is reusing single-use spacers like ceramic cross spacers multiple times — they lose precision fast. Another is forgetting to remove leveling clips before the adhesive fully cures, which makes removal difficult and risks chipping tiles.

In Israel's climate, with big temperature and humidity swings, leave at least 2mm of grout even on large tiles to prevent future cracking. Local flooring standards recommend uniform spacing and a fit check before final adhesion.

Before you start, make sure the floor or wall is level and dust-free. Prep all your tools first — clips, spacers, pliers, and the screw leveling system if you're using one.

Lay the first tile, insert a spacer at each corner, and move to the next tile. With screw-based leveling systems, tighten the screw until adjoining tiles sit at exactly the same height, then snap the clip base in place.

Once the adhesive cures (usually 24–48 hours), use the clamp pliers to snap off the protruding clip stems cleanly. Wear work gloves to avoid cuts from the plastic edges.