Skip to main content
Official Importer & Authorized Brands
ברגים, מסמרים, אטבים ורכיבי הידוק

Screws & Anchors — Full Install & Buying Guide | 2026 | ramo.co.il

How to choose and install screws and anchors right? Full guide to screw-plug kits, sink screws and connectors from ₪5 incl. VAT. Full price list at ramo.co.il.

•7 min read
Screws and Anchors — ramo.co.il

A screw that pulls out of the wall or an anchor that won't grip — one of the most common DIY frustrations. The secret is matching the screw and anchor to the wall type and the weight you're hanging. At ramo.co.il you'll find screw-anchor kits, sink screws and connectors from ₪5 incl. VAT. This guide shows exactly how to choose and install right.

⚡

Quick Summary

🔩 VERO screw & anchor kit 7mm 100+100 — ₪26
🚿 Sink mounting screw set 10×120mm — ₪5
🪝 Screw hook for garden and home — ₪30
🧱 VERO honeycomb set standard No.2 — ₪48
✅ All in stock with fast shipping

How to choose the right screw & anchor? 🤔

The first rule is matching the wall type. Solid concrete needs different anchors than drywall or block. Drywall needs a butterfly or special anchor that opens behind the board, while concrete grips a regular plastic anchor (like the VERO 7mm kit) perfectly.

Second, match the diameter and length to the weight. The heavier the item, the thicker and longer the screw. A sink screw set (10×120mm) is designed for the load of a water-filled sink.

The common mistake is drilling too large a hole. The hole must match the anchor diameter exactly — too wide and the anchor spins instead of gripping. Better to start with a small bit and enlarge gradually.

💡

💡 Pro tip

Buy a ready screw-anchor kit (like VERO Troy at ₪26) instead of buying separately — the screw and anchor are matched exactly, saving guesswork on site.

Step-by-step installation 🔧

First, mark the point and make sure there's no plumbing or wiring behind the wall. Pick a bit matching the anchor diameter and drill slightly deeper than the anchor length.

Clean dust from the hole (blow it out or vacuum) — dust stops the anchor gripping. Insert the anchor flush with the wall, then drive the screw. Tighten by hand or driver until the item is stable, but don't overtighten or you'll crack the anchor.

To test, gently pull the item you hung. If it moves, switch to a larger anchor. Always use rust-coated screws in damp areas like bathrooms or outdoors.

Screws & Anchors Price List 🛒

ImageProductPrice (incl. VAT)StockBuy
product
Weissboard Connector No.2 — 12 units**₪5** incl. VAT✅ In stock🛒 Buy
product
Sink Mounting Screw Set 10×120mm**₪5** incl. VAT✅ In stock🛒 Buy
product
Magido Set (Lens) 7mm**₪7** incl. VAT✅ In stock🛒 Buy
product
VERO Troy Set — Screw & Plug 7mm 100+100**₪26** incl. VAT✅ In stock🛒 Buy
product
Screw Hook**₪30** incl. VAT✅ In stock🛒 Buy
product
Stake Screw WADFOW 4.8×37mm**₪27** incl. VAT✅ In stock🛒 Buy
product
VERO Honeycomb Set Standard No.2**₪48** incl. VAT✅ In stock🛒 Buy
product
Stake Screw (Lens) VERO 37mm**₪495** incl. VAT✅ In stock🛒 Buy
❓

Frequently asked questions ❓

How do I know which anchor fits my wall?

In solid concrete a regular plastic anchor is enough (VERO 7mm kit at ₪26 incl. VAT). Drywall needs a special anchor that opens behind the board.

What drill bit diameter should I use?

Use a bit exactly matching the anchor diameter. Too wide a hole stops the anchor gripping.

What suits hanging a heavy sink?

The 10×120mm sink mounting screw set (₪5 incl. VAT) is designed exactly for the load of a full sink.

Are the screws suitable for outdoors and damp areas?

In damp areas choose rust-coated screws. Check the product description before buying.

🎯

Conclusion

Choosing the right screw and anchor is the difference between a mount that lasts years and one that falls. All kits in stock — order now.