Skip to main content
Official Importer & Authorized Brands

System guide

Wet Room Tiling System Builder

Built from the official Termokir and Sakret technical data sheets. Every step includes the correct product, application guidance, and wait time.

The proposed system is based on the official technical specification. Swimming pools and water tanks require a representative visit before materials are ordered.

SE-980 always comes first before any tile bonding.
Five ordered steps with explicit wait times.
Suitable for pools, balconies, and wet rooms.

Project details

Choose the room type, substrate, tile type, and tile size. The tool will build the full system for you.

Room type / location
Substrate / base surface
Tile type
Tile size
mยฒ
The result shows the full system in the correct sequence with exact products and wait times.

Wet room system FAQ

The proposed system is based on the official technical specification. Swimming pools and water tanks require a representative visit before materials are ordered.

Do I have to apply SE-980 before tiling in a wet room?

Yes. SE-980 is a mandatory step before any tile bonding in wet rooms, pools, and balconies. Apply two full coats and wait until the following day before continuing.

How long should I wait between waterproofing coats?

Wait at least 3 hours between the first and second waterproofing coats.

How long after bonding can I fill joints with JF 930 grout?

Wait at least one full week after the adhesive step before filling joints with JF 930 grout.

What is the difference between JF 930 and SE 963?

JF 930 is an acrylic grout for standard joints. SE 963 is a flexible silicone sealant intended only for movement joints, corners, and floor-to-wall transitions. They are not interchangeable.

Is SE-980 approved for drinking water tanks?

Yes. SE-980 complies with Israeli Standard 5452 for drinking water tanks. For pools and tanks, three full coats must be applied.