Choosing the right XDRILL screw saves time and prevents failures. For roofs and insulated panels, the EPDM washer screw (₪139) seals water leaks. For wood, the waxed countersunk screw (₪55) gives a smooth finish. Thin metal? The self-drilling wafer head (₪48) cuts without pre-drilling. Gypsum boards? The fine-thread screw (₪45) grips metal frames tightly. Match the screw tip and head to your material—don't guess.
Краткое резюме
- EPDM washer screw seals roofs and prevents leaks
- Self-drilling tip cuts thin metal without pre-drilling
- Waxed wood screw gives smooth finish on wood/MDF
- Fine-thread gypsum screw grips metal frames tightly
- Includes bits in packages for fast, compatible work
Featured xDrill products
Here are the products compared in this guide:
- Drilling Screws for Roofs and Sheets with EPDM Washer and Full Sealing | XDRILL - ₪139
- Wood Screw 4׳0 mm Countersunk Head PZ with White Zinc Coating | 800 Units + PZ2 Bit | XDRILL - ₪55
- ST4.2×¹3 Self-Drilling Screw with Phillips Washer Head in White Zinc Coating | 1000 Units + Phillips Bit | XDRILL - ₪48
- Gypsum Screw ST3.5 Pointed in White Coating | 1000 pcs + Phillips Screw | XDRILL - ₪45
- Borg Gips ST3.5׳5 Head Borgla Hbrga Edina Lfah | 700 Units + Bit Philips - ₪38
- Boring Head Disc Philips ST4.2×¹3 mm for Steel and Profiles 1200 Units - ₪38
Винты для ввинчивания для крыш и листов с шайбой EPDM и полным уплотнением | XDRILL
139 ₪
Посмотреть товар
Деревянный винт 4׳0 мм с потайной головкой PZ с белым цинковым покрытием | 800 единиц + бит PZ2 | XDRILL
28 ₪
Посмотреть товар
Саморез ST4.2×¹3 с головкой-диска Филлипс в покрытии White Zinc | 1000 единиц + бит Филлипс | XDRILL
30 ₪
Посмотреть товар
Гипсовый винт ST3.5 с острием в белой покрытии | 1000 шт + винт Philips | XDRILL
45 ₪
Посмотреть товар
Борг Гипс ST3.5׳5 Голова Боргла Хбрга Эдина Лфах | 700 Шт + Бит Филипс
24 ₪
Посмотреть товар
Буровая головка диск Philips ST4.2×¹3 мм для стали и профилей 1200 единиц
30 ₪
Посмотреть товарHow to Choose the Right Screw
Start by matching the screw type to your material. For roofs and insulated panels, choose the EPDM washer screw (₪139) because its built-in seal prevents water leaks. For wood, MDF, or chipboard, the countersunk wood screw (₪55) offers a smooth finish with its waxed coating for faster driving. When working with thin metal sheets or HVAC profiles, the self-drilling wafer head screw (₪48) is ideal as it cuts through metal without pre-drilling. For gypsum boards on metal frames, use the fine-thread gypsum screw (₪45) which grips tightly without tearing the paper. Always check the head type: hex heads for torque, wafer heads for load distribution, and bugle heads for gypsum sinking. Don't forget the included bits in most packages—they save time and ensure compatibility.
Quick Comparison: Top Picks
| Feature | Drilling Screws for Roofs and Sheets with EPDM Washer and Full Sealing | XDRILL | Wood Screw 4׳0 mm Countersunk Head PZ with White Zinc Coating | 800 Units + PZ2 Bit | XDRILL | ST4.2׹3 Self-Drilling Screw with Phillips Washer Head in White Zinc Coating | 1000 Units + Phillips Bit | XDRILL | Gypsum Screw ST3.5 Pointed in White Coating | 1000 pcs + Phillips Screw | XDRILL | Borg Gips ST3.5׳5 Head Borgla Hbrga Edina Lfah | 700 Units + Bit Philips | Boring Head Disc Philips ST4.2׹3 mm for Steel and Profiles 1200 Units |
|---|---|---|---|---|---|---|
| Best for | Roofs, insulated panels, and water sealing | Wood, MDF, and chipboard with smooth finish | - | - | - | - |
| Price | ₪139 | ₪55 | ₪48 | ₪45 | ₪38 | ₪38 |
More xDrill Sheet Metal Screws
Use the catalog below to continue comparing related products from the same brand.
Фильтры
⚖️What shoppers usually like and check first
✅Advantages
- •Built-in EPDM washer seals water on roofs and panels
- •Self-drilling tips cut metal without pre-drilling
- •Waxed coating speeds up wood screwing with smooth finish
- •Fine threads grip metal frames tightly in gypsum work
- •Includes compatible bits in most packages for instant use
❌Limitations
- •Not all screws are suitable for thick metal without pre-drilling
- •Waxed coating may wear off if stored in humid conditions
- •Some gypsum screws require precise torque to avoid over-sinking
Questions and answers
Which screw is best for sealing roofs?
Use the EPDM washer screw (₪139) for roofs and insulated panels. Its built-in seal prevents water leaks and handles outdoor weather.
Can I screw into metal without pre-drilling?
The self-drilling wafer head screw (₪48) cuts through thin metal sheets and HVAC profiles without pre-drilling. It's fast and reliable for metalwork.
What screw works best for gypsum boards on metal frames?
Yes, the fine-thread gypsum screw (₪45) grips metal frames tightly and sinks cleanly into gypsum boards without tearing the paper.
Which screw gives a smooth finish on wood?
The countersunk wood screw (₪55) has a waxed coating for smooth driving and a flush finish. Ideal for wood, MDF, and chipboard projects.
Заключение
Your project's success depends on picking the right screw for the material. If you're sealing a roof, the EPDM washer screw is your best investment. For interior woodwork, the waxed wood screw delivers speed and a clean look. Don't guess—match the screw's tip and head to your task. Buy in bulk packs (800–1000 units) to save on contractors' jobs, and always use the included bit for perfect results. Start your order now and finish faster with XDRILL's professional-grade screws.