Skip to main content
Официальный импортёр и авторизованные бренды

Free adhesive guide

Tile Adhesive Selector

This selector is limited to the official AD adhesive range and uses the datasheet water ratios and open times for each product.

AD 613 GEL is indoor-only and is the only gypsum-rated product in this selector. AD 700 is the only product here rated up to 150°C.

Four official adhesive options only
Includes open time and mixing ratio
Flags waterproofing and primer add-ons around the adhesive

Project inputs

Choose tile type, substrate, location, and tile size. Movement demand and temperature exposure refine the recommendation for outdoor movement zones and high-heat applications.

Substrate
Location
Tile size
Movement demand

Use high only when the zone needs extra flexibility.

Temperature exposure

Leave at standard unless the tiles are near a high-heat source.

The result shows the recommended adhesive, its classification, mixing ratio, open time, and the related waterproofing, primer, grout, and sealant items.

Adhesive selector FAQ

AD 613 GEL is indoor-only and is the only gypsum-rated product in this selector. AD 700 is the only product here rated up to 150°C.

When should AD 613 GEL be used?

Use AD 613 GEL for large-format porcelain or gypsum-board conditions, indoor only.

Which product handles the highest heat exposure?

AD 700 is the only selector product rated for temperature exposure up to 150°C.

Which product is the basic choice for standard ceramic or porcelain?

AD 503 is the basic C2T choice for standard ceramic or porcelain on a cement substrate.

What is the minimum wait before JF 930 grout?

Wait at least one full week after adhesive application before grouting with JF 930.